Download Print this page

Makita HW001G Instruction Manual page 16

Hide thumbs Also See for HW001G:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Battery tool use and care
1.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
2.
Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
3.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
4.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
5.
Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in
fire, explosion or risk of injury.
6.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
7.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Service
1.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
2.
of battery packs should only be performed by the
manufacturer or authorized service providers.
Follow instruction for lubricating and chang-
3.
ing accessories.
IMPORTANT SAFETY WARNINGS
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
WARNING – When using this product, basic pre-
cautions should always be followed, including the
following:
Work area safety
1.
Keep operating area clear of all persons.
2.
Do not overreach or stand on unstable sup-
ports. Keep good footing and balance at all
times.
3.
Always place the high pressure washer body
on a level and stable surface. Avoid areas
where the ejected water will run or pool.
4.
Before cleaning, check the surroundings and
objects to be cleaned. High pressure jets can
scrape away paint or other surface treatments
including toxic chemicals. Take the preventive
measures if necessary.
5.
Be careful not to trip over by the hose of the
high pressure washer. Always be aware of the
configuration of the hose during operation.
6.
During use, a small amount of water will come
out from the bottom of the high pressure
washer. Avoid locating the high pressure
washer in the areas where you don't want to
wet.
Personal safety
1.
To protect against the jet and objects by the
jet, operators should wear appropriate cloth-
ing such as safety boots, safety gloves, safety
helmets with visors, hearing protection, etc.
2.
Do not use the high pressure washer within
range of persons unless they wear protective
clothing.
3.
To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
4.
If connection is made to a potable water sys-
tem, the system shall be protected against
backflow.
5.
Water that has flowed through backflow pre-
venter is considered to be non-potable.
Electrical safety
Never touch battery cartridges with wet hands.
1.
2.
Do not use the machine if the important parts
of the machine are damaged, e.g. safety
devices, high pressure hoses, or the trigger
gun.
Power tool use and care
Read all the instructions before using the
1.
product.
2.
Know how to stop the high pressure washer
and bleed pressures quickly. Be thoroughly
familiar with the controls.
3.
High pressure jets can be dangerous if mis-
used. The jet must not be directed at people,
live electrical equipment, or the machine itself.
4.
This machine is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory, or mental capabilities, or lack of
experience and knowledge.
Children should be supervised to ensure that
5.
they do not play with the appliance.
6.
Do not spray flammable and/or toxic liquids.
This may cause an explosion, intoxication, or
damage to the machine.
7.
Do not direct the jet against yourself or others
in order to clean clothes or foot-wear.
8.
High pressure hoses, fittings and couplings
are important for the safety of the machine.
Use only hoses, fittings and couplings recom-
mended by the manufacturer.
9.
Follow the instructions when changing
accessories.
16 ENGLISH

Advertisement

loading