Charging - Philips AquaTrio Cordless 7000 Series User Manual

English
8

Charging

The appliance is equipped with a 25 V Li-Ion battery. Charging takes 4 hours.
1 To charge the appliance, open the sealing cap on the back of the appliance.
2 Insert the power plug into the socket on the back of the appliance. Then
insert the adapter into the wall socket.
3 A value between 0% and 90% flashes on the screen to indicate that the
appliance is charging.
4 When the appliance is fully charged, the value 100% lights up on the screen.
After a few minutes, the display will switch off.
5 Remove the power plug from the socket on the back of the appliance.
6 Close the sealing cap.
Warning: Store and charge the appliance at a temperature
above 5 °C and below 35 °C.