Table of Contents
Advertisement
General settings
10:30
10:30
⏎
Protection. Allows enabling/disabling/changing the robot's PIN CODE.
To set or change the password, first enter the current PIN CODE and then the new PIN CODE. Upon purchase,
the password entered by the manufacturer consists of four numbers ("0000").
Choose a number combination for the password that is easy to remember.
Connectivity. (Only in some models). Allows changing the connection parameters.
General settings.
10:30
-
Allows setting the language of the user menu and messages.
-
Allows setting the date and time of the robot.
-
Allows setting the unit of measurement of the distances and areas.
-
Allows turning the sound alerts on and off.
This allows setting a correction factor for the alignment and recognition of the charging station. Refer to the robot
menu or the APP for more details.
Resets the factory settings.
All configurations will be lost, the robot and garden settings will have to be configured again. The
PIN CODE will not be reset to the default value.
Sets the distance travelled by the robot after the perimeter wire, before changing direction. Set MIN to allow the
robot to travel the minimum possible distance, MAX for the maximum possible distance and MED for the medium
distance.
General settings.
27
EN
User's manual
Advertisement
Table of Contents
