Channel mode
P
●
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C
●
(aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Transfer Channel List
Screen Menu >
Broadcasting
Imports or exports the channel map.
"
You should connect USB storage to use this function.
"
The PIN input screen appears. Enter the PIN using your remote.
Import from
USB: Import channel list from USB.
●
Export to
USB: Export channel list to USB. This function is available when USB is connected.
●
Now
Delete CAM Operator Profile
Screen Menu >
Broadcasting
Select the CAM operator to delete.
S
(cable channel mode)
Channel Settings
>
Channel Settings
>
Transfer Channel List
>
Try Now
Delete CAM Operator Profile
>
Try Now
Try Now
Try