Table of Contents
Advertisement
Universal Remote Setup
Screen Menu >
System
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home
theatres, and other third-party external devices connected to the TV using the TV's remote control.
You can also use the Anynet+ (HDMI-CEC) function to operate Samsung external devices with your
TV's remote control without any additional setup. For more information, Refer to the "Anynet+ (HDMI-
CEC)" for more information.
Connecting the IR EXTENDER CABLE
Keep a distance of 5 cm at least between the IR EXTENDER CABLE and the external device, as the
illustration shows. Face the IR EXTENDER CABLE toward the external device's remote control signal
receiver. Note that it should be no obstacle between IR Extender and external device. The presence of
an obstacle will interfere with the transmission of the remote control signal.
"
The colour and design of the IR extension cable may vary depending on the model.
Add the External Device
11
Turn on the external device you wish to set up universal remote function for and then press
SOURCE
to bring up the
21
Universal remote setup
Select
setup process.
31
Follow the on-screen instructions for the Universal Remote Setup. If it does not respond properly,
set up the remote control by entering the model number manually.
Device Manager
>
>
Source
screen.
from the top of the screen. This initiates the universal remote
Universal Remote Setup
Try Now
Advertisement
Table of Contents
