When Aerial Source Is Set To Air Or Cable; Transfer Channel List; Delete Cam Operator Profile - Samsung KE55S9CSL E-Manual

When Aerial Source is set to Air or Cable

Digital Channel Tuning
●
Scans for a digital channel.
11
Select the New.
"
When selecting
"
When selecting
21
Select the Search. When scanning has finished, a channel is updated in the channel list.
Analogue Channel Tuning
●
Scans for an analogue channel.
11
Select the New.
21
Set the Programme,
31
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
P
●
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C
●
(aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.

Transfer Channel List

Screen Menu > Broadcasting
Imports or exports the channel map.
"
You should connect USB storage to use this function.
"
The PIN input screen appears. Enter the PIN using your remote.
Import from USB: Import channel list from USB.
●
Export to USB: Export channel list to USB. This function is available when USB is connected.
●
Now

Delete CAM Operator Profile

Screen Menu > Broadcasting
Select the CAM operator to delete.
"
This function may not be supported depending on the country.
Aerial → Air: Channel, Frequency,
Aerial → Cable: Frequency, Modulation,
Colour System, Sound
S
(cable channel mode)
Channel Settings
>
Channel Settings
>
Bandwidth
Symbol Rate
System, Channel and Search.
Transfer Channel List
>
Try Now
Delete CAM Operator Profile
>
Try Now
Try Now
Try