Luggage Strap Holders; Auxiliary Dc Jack - Yamaha TRACER 7 Owner's Manual

Instrument and control functions

Luggage strap holders

5
ZAUM1410
1. Luggage strap holder
Use the indicated strap points to se-
cure luggage ties to the vehicle.
EAU84680

Auxiliary DC jack

1
1. Auxiliary DC connector cap
2. Auxiliary DC connector
A 12-V accessory connected to the
auxiliary DC jack can be used when the
main switch is on.
NOTICE
The accessory connected to the
auxiliary DC jack should not be used
with the engine turned off, and the
load must never exceed 12 W (1 A),
otherwise the fuse may blow or the
battery may discharge.
To use the auxiliary DC jack
1. Turn the main switch off.
2. Remove the auxiliary DC jack cap.
5-27
3. Turn the accessory off.
EAU49454
4. Insert the accessory plug into the
auxiliary DC jack.
1
5. Turn the main switch on, and start
the engine. (See page 7-2.)
6. Turn the accessory on.
2
WARNING
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC jack
is not being used.
ECA15432
EWA14361