Metso Nordtrack J127 Driving Instruction
  1. Manuals
  2. Brands
  3. Metso Manuals
  4. Industrial Equipment
  5. Nordtrack J127
  6. Driving instruction
Metso Nordtrack J127 Driving Instruction

Metso Nordtrack J127 Driving Instruction

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Nordtrack J127
20717-EN
1
DRIVING
S
For more information and
language versions, see:
metso.com/driving

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Nordtrack J127 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Metso Nordtrack J127

Summary of Contents for Metso Nordtrack J127

  • Page 1 Nordtrack J127 20717-EN DRIVING For more information and language versions, see: metso.com/driving...
  • Page 2 Metso's liability for any errors in the document is limited to the documentary correction of errors.

  • Page 3: Table Of Contents

    1.1.8    Stopping the engine......................24 1.1.9    Troubleshooting........................25 1.1.9.1    Pairing the remote control device to the machine..........26 3 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...

  • Page 4: Driving Instructions

    Driving instructions 1.1    Driving instructions These driving instructions are valid for Nordtrack J127 machines. The purpose of these instructions is to enable safe moving of the machine during transportation. NOTE: Do not use the machine for screening or crushing solely based on these instructions. The actual instruction manual for the machine is delivered separately.

  • Page 5: Driving Directions

    1.1.2    Driving directions 1. Forward 3. Left 2. Backward 4. Right 5 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision: Metso Document ID: D100020717...

  • Page 6: Emergency Stop Locations

    (located on either the drive control device or the radio control device). Before starting the machine, make sure you know the location of the emergency stop buttons. 6 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...

  • Page 7: Drive Controls

    Only lift and hold the drive control device by its handles. Do not pull the drive control device from the cable. 7 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...

  • Page 8: Preparing For Driving

    1.1.6    Preparing for driving 1. On the left-hand side of the machine, locate the main switch (1) and turn it to ON position. 8 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 9 3. Locate the control panel. It is located in the power unit on the right-hand side of the machine. Figure 5. Control panel location (1) 9 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 10 3. Key switch: OFF position 7. LCD screen 4. Key switch: Power ON position (includes engine pre-heat) 10 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision: Metso Document ID:...

  • Page 11: Starting The Engine

    Walk around the machine and make sure that there is nobody on, by or below the machine. Warn everybody nearby before starting. 11 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 12 4. Turn the key clockwise to the Power ON position (2). The display will start its boot sequence followed by entry into the main menu view. 12 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 13 9. Before operating the machine, allow the engine to run at idle for 5 minutes to allow the running temperature to be reached. 13 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...

  • Page 14: Adjusting The Engine Speed

    2. Press to increase the engine speed 4. Press to ramp down the engine speed to its continuously minimum 14 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:...

  • Page 15: Monitoring Engine Information

    The engine screen is shown on the display. The status and warning indicator bar (1) shows all engine warnings. Figure 15. Engine screen In the Engine screen, you can view and monitor following information: 15 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:...
  • Page 16 16. Crushing Hours: Total number of hours that the green when an engine service is required. crusher has run (since new). 16 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...
  • Page 17 17 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:...

  • Page 18: Preventing And Initiating Dpf Generation

    The exhaust gas is very hot. Note that the exhaust gas can be even hotter during regeneration of the diesel particulate filter. 18 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...

  • Page 19: Connecting The Remote Control Device (Wireless Connection)

    1. Connect the cable (1) to the socket on the base of the remote control device (2) and the other end of the cable to the socket on the machine (3). 19 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 20 Alternatively, you can leave the remote control device to charge for wireless use – the Lock LED on the remote control device flashes red during charging and is extinguished when the remote control device is fully charged. 20 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...

  • Page 21: Unlocking The Remote Control Device

    Lock button (arrow (1) in figure below) for at least 3 seconds until the Lock LED turns green. 21 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...

  • Page 22: Driving

    1. Check the directions of remote control device levers compared to the directions of the machine from Driving directions 2. On the display, press the Track button (L3) corresponding to the following icon: 22 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No:...
  • Page 23 Figure 30. Speed selection from the Tracking Control menu 1. Button R5: Slow speed 2. Button R4: Intermediate speed 3. Button R3: Fast speed 23 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:...

  • Page 24: Stopping The Engine

    2. To stop the diesel engine, turn the ignition key to off position (1) and remove the key. The remote control device turns off automatically at the same time. 24 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...

  • Page 25: Troubleshooting

    If there is a problem which prevents the track driving and it cannot be solved by using this driving instruction, contact Metso. 25 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...

  • Page 26: Pairing The Remote Control Device To The Machine

    The Radio overlay now appears on the screen (as well as the Radio Pairing button icon on the right): Figure 38. Radio overlay 26 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 27 NOTE: Once pairing has successfully completed, a 4-digit radio code (Tx) is shown for the remote control device on the screen overlay. 27 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type:...
  • Page 28 Nordtrack J127 Driving instructions Figure 41. Pairing successfully completed 28 (30) © Copyright Metso 2023. All rights reserved. Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision: Metso Document ID: D100020717...
  • Page 30 Metso PO Box 1220, FI-00101, Helsinki, Finland Tel +358 20 484 100 www.metso.com © Copyright Metso 2023. All rights reserved.

Table of Contents