TEFAL Cook4me Touch Pro Manual page 32

Hide thumbs Also See for Cook4me Touch Pro:
Table of Contents

Advertisement

Available languages

Available languages

The edge of the bowl is damaged
or dirty.
Clean the bowl.
Ensure that the bowl
is in good condition.
The Cook4me Touch Pro
does not decompress:
The ball cover
is out of place:
Leave the Cook4me Touch Pro
to cool down completely,
remove the metal lid,
and place the ball cover in the
correct position.
Water is leaking behind the
Cook4me Touch Pro:
60
The collector
is not in place or is overflowing.
Ensure that the collector
is correctly positioned
behind the Cook4me Touch Pro.
The bowl is too full.
Ensure that the contents do not
exceed the maximum volume.
If you are using certain ingredients
such as:
- cream,
- wine,
- or milk,
Respect the quantities shown
in the recipe.
These ingredients can cause the
Cook4me Touch Pro to overflow.
The lid won't open
when steam is released:
The locking rod
is still in the upwards position.
Check that all of the steam
has been released
and wait until the Cook4me
Touch Pro
has cooled down fully.
The light
on the lid handle
no longer lights up:
The light is not working.
Take the device
to an Approved Service Centre.
The screen does not light up:
The Cook4me Touch Pro is not
plugged in.
Ensure that the Cook4me Touch Pro
is plugged in
correctly.
The Cook4me Touch Pro is on standby.
Press the dot on the screen.
The inner metal lid cannot
be removed:
The ball lid is positioned incorrectly:
Unscrew the nut on the lid,
remove the inner part of the lid
by pulling it towards you,
access the ball cover,
correctly reposition the
lid.
61

Advertisement

Chapters

Table of Contents
loading

Table of Contents