Cook4Me Touch Pro Error Codes - TEFAL Cook4me Touch Pro Manual

Cook4me Touch Pro error codes

There are several error codes:
• error 1
error communicating
with the keypad.
• error 2
error communicating
with the Wi-Fi.
• error 3
error communicating
with the power board.
• If the temperature sensor
fails,
04, 05, 06, 07, 08,
the numbers
09
are displayed on the Cook4me
Touch Pro.
• error 10
heating error.
62
• error 11
pressure problem.
Unplug the Cook4me Touch Pro.
Ensure that all elements
of your Cook4me Touch Pro
are in good condition.
If needed, clean the elements
of your Cook4me Touch Pro
following the cleaning
instructions.
Ensure that the valve cover
is correctly in place.
• error 13
excess pressure.
• error 14
low pressure
due to lack of water:
- add water to the bowl,
- resume cooking.
• error 15
decompression fault:
- unplug the Cook4me Touch Pro,
- leave to cool,
- remove the metal lid,
- correctly position
the ball cover.
• error 16
the Cook4me Touch Pro
doesn't build up pressure:
- add water to the bowl,
- resume cooking.
• error 17
the Cook4me Touch Pro
pressure fails to raise.
See page 26
"The Cook4me Touch Pro pressure
fails to raise and steam is not being
released properly".
• error 18
failure to detect the
locking rod.
• error 101, 106
display or recipe
loading error:
Unplug and restart the appliance.
If the problem persists, take
your appliance to an
Approved Service Centre.
For all problems,
unplug the Cook4me Touch Pro.
If the problem persists,
contact an Approved Service Centre.
If you experience
connection problems,
visit www.tefal.co.uk or
the Tefal app.
63