Haverland CAsAp WIFI Manual page 23

3-5 3-6
4. Home Setting.
To adjust the different settings from HOME page.
1
4
3-7
REMOTE CONTROL
a) Before using the remote control, remove the
plastic protector from the battery.
b) The control functions works the same as the
control panel.
5. When the Air cooler is added, the success page (as shown
in Figure 3-5) will be displayed. You can change the name of
the device, then enter into the control interface.
NOTE:
1- Please make sure the mobile phone and the Air Cooler are
close together when setting the network for the first time.
2- Please make sure your phone is connected to a 2.4GHz
network, if your router use both 2.4 GHz and 5 GHz network,
please use Only 2.4 GHz network for WIFI connection.
3- Please make sure your phone is connected to the WIFI and
that the password is correct.
4- If the Air cooler does not connects, a connection timeout
page will pop up. You can try adding it again or consult Help.
5- If the Air cooler goes offline, "Offline" will be displayed and
the Air cooler becomes unavailable.
1- If your account has multiple families, tap here to change
2
or add families.
2- Tap this icon to use voice commands to control devices.
3
3- Tap "+" to add differents types of devices.
5 4- Controls multiple devices and executes actions
automatically.
5- Manage rooms to view status of smart devices.
- 8 -