Table of Contents
Advertisement
State of abnormality
The vacuum cleaner runs while the
tool is not operating.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning up chip discharge
openings
Clean the chip discharge openings regularly.
Use a compressed air to clean the clogged chip dis-
charge openings.
Sharpening blades
For conventional planer blades only
Always keep your planer blades sharp for the best
performance. Use the sharpening holder (optional
accessory) to refine the planer blade edges safely and
effectively.
► Fig.57: 1. Sharpening holder 2. Blade
1.
Loosen the two wing nuts in the sharpening
holder.
2.
Slip the back ends of the planer blades into the
mounting slots as far as they will go with the cutting
edges to be sharpened facing downwards.
► Fig.58: 1. Sharpening holder 2. Wing nut 3. Blades
4. Cutting edges 5. Mounting slots 6. Bolt
head
3.
Tighten the wing nuts to secure the planer blades
in place.
4.
Soak a dressing stone in water for 2 or 3 minutes
before sharpening.
5.
Hold the sharpening holder firmly, and gently
place the cutting edges over the surface of the dressing
stone.
6.
Sharpen the cutting edges by moving the sharpen-
ing holder back and forwards.
► Fig.59
Probable cause (malfunction)
Other users are using the wireless activation
of the vacuum cleaner with their tools.
23 ENGLISH
Remedy
Turn off the wireless activation button of the other tools or
cancel the tool registration of the other tools.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
High-speed steel Planer blade
•
Tungsten-carbide Planer blade (For longer blade
life)
•
Mini planer blade
•
Sharpening holder assembly
•
Blade gauge assembly
•
Set plate set
•
Guide rule assembly
•
Dressing stone
•
Dust bag assembly
•
Elbow
•
Chamfering rule assembly
•
Wireless unit
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Advertisement
Table of Contents
