Biostar I86PE-A4 Setup Manual page 61

3.5 H -T
YPER HREADING
This option allows you to enable or disabled Hyper-Threading Technology.
"Enabled" for Windows XP and Linux 2.4.x (OS optimized for
Hyper-Threading Technology). "Disable" for other OS (OS not optimized
for Hyper-Threading Technology).
The Choices:
Enabled (Default), Disabled.
3.6 Q P
UICK OWER
Enabling this option will cause an abridged version of the Power On
Self-Test (POST) to execute after you power up the computer.
Disabled
Enabled (default)
3.7 B U N
OOT P UM
Selects the NumLock. State after power on.
On (default)
Off
3.8 G A20 O
ATE
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
3.9 T R
YPEMATIC
When a key is held down, the keystroke will repeat at a rate determined
by the keyboard controller. When enabled, the typematic rate and
typematic delay can be configured.
The Choices:
Disabled (default), Enabled.
3.10 T R
YPEMATIC
Sets the rate at which a keystroke is repeated when you hold the key
down.
The Choices:
6 (default), 8,10,12,15,20,24,30.
I86PE-A4 BIOS Setup
T
ECHNOLOGY
O S T
N ELF EST
L S
OCK TATUS
Numpad is number keys.
Numpad is arrow keys.
PTION
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
S
ATE ETTING
(C /S )
ATE HARS EC
11
Normal POST.
Enable quick POST.