Biostar I86PE-A4 Setup Manual page 60

3.2 C S
ACHE ETUP
CPU L1&L2 Cache
Depending on the CPU/chipset in use, you may be able to increase
memory access time with this option.
Enabled (default)
Disabled
3.3 CPU F
EATURE
3.3.1 Thermal Management
This item allows you to choose the monitor's thermal management.
The Choices:
Thermal Management 1 (default), Thermal Management 2.
3.3.2 TM2 Bus Ratio
Represents the frequency bus ratio of the throttled performance state
that will be initiated when the on-die sensor goes from not hot to hot.
The Choices:
0X (default).
3.3.3 TM2 Bus VID
Represents the voltage of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
The Choices:
0.8375 (default).
3.3.4 Limit CPUID
This item allows you to set the limit of the CPU ID with a maximum
value to 3. It should be disabled for WinXP.
The Choices:
Disabled (default), MaxVal.
3.4 V W
IRUS ARNING
This option allows you to choose the Virus Warning feature that is used
to protect the IDE Hard Disk boot sector. If this function is enabled and
an attempt is made to write to the boot sector, BIOS will display a
warning message on the screen and sound an alarm beep.
Enabled
Disabled (default)
I86PE-A4 BIOS Setup
Enable cache.
Disable cache.
Virus protection is activated.
Virus protection is disabled.
10