Setting Up The Network; Wireless Setup - Toshiba 32UL863B Owner's Manual

Setting up the Network

You can select the Network Type.
a
C c
Press MENU / to highlight Setup icon.
b
B C c
Press / to highlight Preferences icon and
press OK.
c
B b
Press or to select Network Setup and press OK.
Preferences
Recording Setup
Camera Sensor Setup
Personal TV Setup
REGZA-LINK Setup
Network Setup
Network Device Setup
Photo Frame Setup
Teletext
d
B b
Press or to select Network Type, and then press
C c
or to select Wired or Wireless.
Network Setup
Network Type

Wireless Setup

Advanced Network Setup
Network Connection Test
NOTE: If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
e
If you selected Wired, see "Advanced Network Setup"
on page 45.
Wireless Setup
NOTE (for SL86 series):
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
• When you insert or remove the wireless LAN adaptor, you
must turn off your TV and unplug the power cord, and then
plug and turn on again.
• Continued connection of AP (Access Point) is not guaranteed.
The connection may be disconnected while watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type is set to Wireless or wireless
communication is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS is an industry standard designed to make connection
of wireless LAN equipment and security setup easy. WPS
will automatically configure all wireless settings.
Assisted Setup (setup by using the AP's notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup (manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a
b
c
Auto
d
e
f
Wired
g
To cancel searching for the AP:
Press BACK while searching for the AP. A message will
appear, and then press C or c to select Yes and press
.
OK
Easy Setup using PIN (Personal Identification
Number)
a
b
c
d
e
f
g
43
CONTROLS AND FEATURES
In the Preferences menu, press
Network Setup and press OK.
B b
Press or to select Wireless Setup and press OK.
B b
Press or to select Easy Setup and press OK.
Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
Enhanced 11n
C c
Press or to select PBC.
b
Press to highlight Start Scan and press OK.
Following the on-screen instructions, push the
appropriate button on your AP.
When a window reporting that the setup is complete
appears, press OK.
In the Preferences menu, press
Network Setup and press OK.
B b
Press or to select Wireless Setup and press OK.
B b
Press or to select Easy Setup and press OK.
C c
Press or to select PIN.
b
Press to select Start Scan and press OK.
B b
Press or to select the desired AP and press OK.
NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays to
report that the setup is complete, press OK.
B b
or to select
On
Off
B b
or to select