Output Condition; Sample Protocols (Kern Ykb-01N) - KERN ADB-C Series Operating Instructions Manual

12.3.2 Output condition

The data transfer type is determined in this menu item

12.4 Sample protocols (KERN YKB-01N)

+ 10.0000 g SS
- 10.0000 g SD
12.5 Remote control instructions
Command Terminator
ASCII Hex <CR>
O 4F 0D
T 54 0D
0D
C 43
M 4D 0D
W 57 0D
w 77 0D
28
Call up menu item „C5", see chap. 11.1
Use the PRINT key to select the desired setting.
Options:
Automatic output of stable weighing values
C5 - 0
Via remote control command W (w)
C5 - 1
C5 - 2 Continuous data output
C5 - 3 Output for stable and instable weighing values
after pressing PRINT key
Save / back to weighing mode, see chap. 11.1
Stable/positive weighing value
Instable/negative weighing value
<LF>
0A Function such as ON/OFF key
0A Function such as TARE key
0A Function such as CAL key
0A Function such as MODE key
0A Function such as PRINT key
0A Function such as PRINT key
Function
ADB_ADJ-BA-e-2234