Table of Contents
Advertisement
Introduction
Projector features
The projector offers the following features
• Interactive capability
Extend the interactive function with optional PointWrite module.
• Vertical 2% lens shift (No available in LH856UST)
Optimize the installation flexibility.
• Corner fit
Correct each distorted corner to get a perfect rectangular image.
• Filter Free
Filter free design to lower maintenance and operating costs.
• Network Control
Integrated RJ45 connector for wired network control allowing management of projector status
from a computer using a web browser.
Enable Network Standby mode <2W.
• Crestron RoomView®, and AMX supported
The projector supports Crestron eControl and RoomView and AMX allowing you to control
and manage equipment from a remote computer via LAN connection.
• One-key auto-adjustment
Pressing AUTO on the remote control to show the best picture quality immediately.
• Built-in 10W x 2 speaker(s)
Built-in 10W x 2 speaker(s) providing stereo audio when an audio input is connected.
• Auto Power Off, Signal Power On, Direct Power On
Auto Power Off function allows the projector to turn off automatically if no input signal
is detected after a set period of time. Signal Power On function turns on your projector
automatically once detecting the signal input and Direct Power On boots up the projector
automatically when the power is connected.
• The apparent brightness of the projected image will vary depending on the ambient lighting conditions,
selected input signal contrast/brightness settings, and is directly proportional to projection distance.
Introduction
9
Advertisement
Table of Contents
