Table of Contents
Advertisement
Correcting Corner Fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
Using the OSD menu
1. Press MENU and then press
Installation menu is highlighted and press
2. Press
/
to highlight Corner Fit and press
OK. The Corner Fit page displays.
3. Press
/ / /
corners and press OK.
4. Press
/
to adjust vertical values from 0 to
60.
5. Press
/
to adjust horizontal values from 0
to 60.
Corner Fit and 2D Keystone Adjustment Notice
The corner fit function is closely related to the 2D keystone function as both make adjustments to
correct picture distortion. Therefore, when correcting picture distortion, both corner fit and 2D
keystone functions should be used in conjunction to achieve the best picture shape.
To achieve the best picture shape:
• When installing the projector, align the projector to the screen so they are as perpendicular to
each other as possible in order to minimize picture distortion.
• When making corner fit adjustments, if the desired effect cannot be achieved, adjust the 2D
keystone value and try again.
• When making 2D keystone adjustments, if the desired effect cannot be achieved, adjust the
corner fit value and try again.
Operations
28
/
until the
to select one of the four
..
Advertisement
Table of Contents
