Table of Contents
Advertisement
User Instructions
This Product is supplied with an accessory box, containing the Valve Pack
(Draincock + T&P Valve) and the Human Machine Interface (HMI) kit. The HMI kit
includes a 10 m cable that has to be connected to the motherboard mounted on
the geyser itself, this cable provides power to the HMI and allows for
communication between the motherboard and HMI.
Fig. 1
To mount the HMI, fix the supplied mounting bracket horizontally on the wall
using the two screws provided. Align the HMI to the bracket and slide down as
shown in Fig.1 and Fig.2.
Product Highlights
Eco Evo Function:
the user's energy demand and continue to deliver hot water when needed as
determined by the product in the learning period. (See Eco Evo section for more)
Anti-legionella:
in all fresh water and it grows best between 20° and 45°C. Legionaries' disease
is a pneumonia infection caused by inhaling the Legionella bacteria.
This product has a "thermal disinfection cycle" in place to restrict the
growth of this bacteria by raising the temperature of the water above 60° for 60
minutes once a month. This is activated by default (factory setting), but the cycle
will start automatically only if the default temperature (65°C) is changed below 60°C.
The activation / deactivation of the "thermal disinfection cycle" can be
done through the User Menu (Refer user menu section for more).
Leakage Detection:
detect if there is a water leak and will notify the user with an audio alarm from the
HMI module.
This is an intelligent mode in which the product will learn
Legionella is a small rod-shaped bacteria which can be found
This product is equipped with a leakage sensor which will
Fig. 2
- 1 -
Advertisement
Table of Contents
