Troubleshooting - Jocel JLR014092 Instruction Manual

PROGRAMMES
• The above data is for reference only, and the data may change due to different actual use
conditions.
• The valves given for programs other than the ECO 40-60 program are indicative only.

TROUBLESHOOTING

PROGRAM DOES NOT START AFTER CLOSING THE DOOR
•
Start/Pause/Cancel button was not pressed. >>> *Press the Start/Pause/Cancel button.
PROGRAMME CANNOT BE STARTED OR SELECTED
• Washing machine has switched to self-protection mode due to a supply problem (line voltage,
water pressure, etc.). >>> To cancel the program, turn the Program Selection knob to select
another program. Previous program will be cancelled. (See "Canceling the program").
WATER IN THE MACHINE
• Some water might have remained in the product due to the quality control processes in the
production. >>> This is not a failure; water is not harmful to the machine.
MACHINE VIBRATES OR MAKES NOISE
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump filter.
• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
• Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine
or distribute the load by hand to balance it homogenously in the machine.
JLR014092
91