Adjusting The Feet; Electrical Connection; Transportation Of The Product - Jocel JLR014092 Instruction Manual

ADJUSTING THE FEET

WARNING: In order to ensure that the product operates more silently and vibration-free,
it must stand level and balanced on its feet. Balance the machine by adjusting the feet.
Otherwise, the product may move from its place and cause crushing and vibration
problems.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.
WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get
damaged.

ELECTRICAL CONNECTION

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable
for any damages that will arise when the product is used without grounding in accordance with the
local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the "Technical specifications" section must be equal to your mains
voltage.
• Do not make connections via extension cables or multiplugs.
WARNING: Damaged power cables must be replaced by the Technical Assistance.

TRANSPORTATION OF THE PRODUCT

• Unplug the product before transporting it.
• Remove water drain and water supply connections.
• Drain all water that has remained in the product. (SEE 5.5)
• Install transportation safety bolts in the reverse order of removal procedure; (SEE 2.3)
Never move the product without the transportation safety bolts properly fixed in place!
WARNING: Packaging materials are dangerous to children. Keep packaging
materials in a safe place away from reach of the children.
72