Jocel JLR014092 Instruction Manual page 86

PROGRESS OF PROGRAMME
Progress of a running program can be followed from the Program Follow-up indicator. At the
beginning of every program step, the relevant indicator light will turn on and light of the completed
step will turn off. You can change the auxiliary functions, speed and temperature settings without
stopping the program flow while the program is running. To do this, the change you are going to
make must be in a step after the running program step. If the change is not compatible, relevant
lights will flash for 3 times.
If the machine does not pass to the spinning step, Rinse Hold function might be
active or the automatic unbalanced load detection system might be activated due to
the unbalanced distribution of the laundry in the machine.
LOADING DOOR LOCK
There is a locking system on the loading door of the machine that prevents opening of the door in
cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode. Machine checks
the level of the water inside. If the level is suitable, Loading Door light illuminates steadily within 1-
2 minutes and the loading door can be opened. If the level is unsuitable, Loading Door light turns
off and the loading door cannot be opened.
If you are obliged to open the Loading Door while the Loading Door light is off, you have to cancel
the current program; see "Canceling the program".
CHANGING THE SELECTIONS AFTER PROGRAMME HAS STARTED
SWITCHING THE MACHINE TO PAUSE MODE
Press the Start / Pause button to switch the machine to pause mode while a program is running.
The light of the step which the machine is in starts flashing in the Program Follow-up indicator to
show that the machine has been switched to the pause mode.
Also, when the loading door is ready to be opened, Loading Door light will also illuminate
continuously in addition to the program step light.
CHANGING THE SPEED AND TEMPERATURE SETTINGS FOR AUXILIARY FUNCTIONS
Depending on the step the program has reached, you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature settings; see, "Spin speed selection" and
"Temperature selection".
If no change is allowed, the relevant light will flash for 3 times.
ADDING OR TAKING OUT LAUNDRY
Press the Start / Pause button to switch the machine to pause mode. The program follow-up light of
the relevant step during which the machine was switched into the pause mode will flash. Wait until
the Loading Door can be opened. Open the Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary functions, temperature and speed settings if
necessary. Press Start / Pause button to start the machine.
CANCELING THE PROGRAMME
To cancel the program, turn the Program Selection knob to select another program. Previous
program will be canceled. End / Cancel light will flash continuously to notify that the program has
been canceled.
86