Regular Cleaning; Technical Specifications - Jocel JLR014092 Instruction Manual

You can remove the filter cover by slightly pushing downwards with a thin plastic
tipped tool, through the gap above the filter cover. Do not use metal tipped tools to
remove the cover.
3. Some of our products have emergency draining hose and some does not have. Follow the steps
below to discharge the water.
Discharging the water when the product does not have an emergency draining hose:
a. Place a large container in front of the filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the
container you have placed in front of the filter. Always keep a piece of cloth handy to absorb
any spilled water.
c. When the water inside the machine is finished, take out the filter completely by turning it.
4. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
5. Install the filter.
6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one
piece, seat the tabs in the lower part into their places first, and then press the upper part to close.

REGULAR CLEANING

Clean the interior of the pump hosing, removing any debris or foreign objects, periodic cleaning,
including optimal frequency, and limescale prevention and procedure.
If the appliance water supply slows or stops completely, the water inlet strainer may be blocked.
Cleaning is recommended every 6 months in any event to reduce chances of valve blockage in
areas using hard water.

TECHNICAL SPECIFICATIONS

Model name
Capacity (kg)
Maximum spin speed (rpm)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Input (V/Hz) Total
90
JLR014092
6
1000
84
60
45
53
220-240V~50Hz