Table of Contents
Advertisement
Available languages
Available languages
Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions
ON/OFF
Turns the unit on or off.
TEMP
Increases temperature
in 1 C(1 F) increments.
O
O
Max. temperatur e is
30 C(86 F).
O
O
SET
Scrolls through operation
functions as follows:
Follow Me(
Fresh(
)
AP mode(
)
The selected symbol will
flash on the display area,
press the OK button to
confirm.
TEMP
Decreases temperature
in 1 C(1 F) increments.
O
O
Min. temperature is
17 C(62 F).
O
O
FAN SPEED
Selects fan speeds in the
following order:
AUTO
LOW MED
NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
SWING
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Model:
NOTE: For RG10B(D1)/BGEFU1 model, press together
seconds will alternate the temperature display between the °C & °F scale.
)
Fresh...
HIGH
RG10B(D)/BGEF & RG10B(D1)/BGEFU1(Fresh feature is not available)
RG10B2(D)/BGCEF (Cooling only models, AUTO mode and HEAT mode
are not available)
RG10B10(D)/BGEF(20-28 C).
SLEEP
Saves energy during sleeping
hours.
OK
Used to confirm the selected
O
&
04
section of this manual.
MODE
Scrolls through operation modes
as follows: AUTO COOL
DRY HEAT FAN
NOTE: HEAT mode is not supported
by the cooling only appliance.
functions
TIMER
Set timer to turn unit on or off
SHORTCUT
Used to restore the current
settings or resume previous
settings.
CLEAN
Used to start/stop the Self
Clean function.
LED
Turns indoor unit's LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
Turbo
Enables unit to reach preset
temperature in shortest possible
time.
buttons at the same time for 3
Advertisement
Chapters
Table of Contents
