Advertisement
Victron & Pylontech UP2500, US2000, US3000, US2000C, US3000C, US5000, US5000B, US5000C, Pelio-L, UP5000,
2023-09-10 19:36 5/12
attempting firmware updates or settings changes on other devices if they depend on the power
supply from the battery. Without this connection, the battery may turn off unexpectedly.
4. GX Device Settings
On the
GX
device,
Select the CAN-bus BMS (500 kbit/s) CAN-profile in the CCGX. Menu path: Settings → Services →
CAN-profile.
After properly wiring and setting the correct CAN-bus speed, the Pylontech will be visible as a battery
in the device list. If you have multiple batteries a single entry will show up, which represents all
batteries:
When the battery is correctly connected this will also set the following values automatically:
Venus Settings → System Setup Parameter Value
DVCC
Shared Voltage Sense
Shared Temperature Sense
The parameters option within the battery page shows the actual battery charge and discharge
limits
Victron Energy - https://www.victronenergy.com/live/
ON
OFF
OFF
Phantom-S, Force-L1 & L2
Advertisement
