Advertisement
Victron & Pylontech UP2500, US2000, US3000, US2000C, US3000C, US5000, US5000B, US5000C, Pelio-L, UP5000,
2023-09-10 19:37 7/11
This parameters page is also a good place to check that all batteries are connected and working
properly. In normal working conditions, the current limit is 25A per cell. For example, 75A charge
current limit ( 75 / 25 = 3 ) means there are 3 Pylontech battery modules connected.
6. VE-Direct MPPT Settings
In normal operation the MPPT charge characteristics are governed by the
instructions from the connected Pylontech battery.
This section presumes familiarity with
The settings below are a precautionary measure.
MPPT Parameter Setting
Battery voltage.
48V
Absorption voltage 53V
7. Example Wiring Diagram
Victron Energy - https://www.victronenergy.com/live/
VictronConnect
Phantom-S, Force-L1 & L2
GX device
via DVCC, with
Advertisement
