FLIR Extech VIR50 User Manual page 9

Setting the Date and Time
Use the ENTER key to scroll to the desired digit and then use the ▲ and ▼ buttons to change the
number. Use the ESC button to exit this mode and save the date and time.
Setting the temperature units (C/F)
Use the ▲ and ▼ buttons to select the desired unit of measure, press the ESC button to exit and
save.
Setting the Cursor style
Use the ▲ and ▼ buttons to select the cursor style (off, cross or circle), press the ESC button to exit
and save.
Setting the Backlight Brightness
Use the ▲ and ▼ buttons to select the backlight brightness level in %, press the ESC button to exit
and save.
VIR50-EU-EN-V2.0 9/11
9