Transfer Files To A Pc; Battery Charging And Replacement - FLIR Extech VIR50 User Manual

Transfer files to a PC

Connect the USB cable from the thermometer to a USB port on the pc or insert the microSD card
into the SD port on the pc.. If the USB cable is used, the USB symbol will appear in the display and
the PC will recognize the unit as a removable drive.
Open the drive to view the three folders:
LOGS: Text files, use the *.txt files
PICTURE: Pictures, use the *.jpg files
VIDEO: Videos, use the *.3gp files
Note: other file types are used by the themometer for internal requirements
Note: If the *.3gp video files will not play on any installed media software, a software plug-in is
available on the supplied CD which will allow compatibility with Media Player.

Battery Charging and Replacement

When the battery display symbol appears empty or close to empty, recharge the
Lithium ion 3.7V/1400mAh rechargeable battery. Connect the supplied USB battery
cable to the mini USB jack in the compartment above the measurement trigger and
then connect the other end of the cable to an AC source. Charge time is approx. 2
hours.
The battery is located in the compartment behind the handle panel and beneath the
meter's trigger. The panel can be released and folded down as shown in the diagram.
Replace the battery if necessary with one of the same type and specifications and
close the battery compartment cover.
You, as the end user, are legally bound (Battery ordinance) to return all used batteries
and accumulators; disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
15
VIR50-EU-EN-V2.0 9/11