Table of Contents
Advertisement
Type k
Use the ▲ and ▼ buttons to enable or disable the Type k contact thermocouple input. Press the
ESC button to exit and save.
NOTE: If a Type-k probe is inserted into the meter's thermocouple jack (in the compartment over
the measurement trigger), 'Enable' will be selected by default. Select the Disable setting to prohibit
the LCD from displaying Type-k temperature.
Memory Setting Mode
From the Video + IR, IR-only, or Dew Point modes, press the ENTER button to access the soft-key
screen . The Memory Settings mode is represented by the icon on the right. Use the arrow buttons
to scroll over to the right icon (if it is not already highlighted). Press the ENTER button again when
the right icon is highlighted to access the Memory Settings mode.
Use the ▲ and ▼ buttons to select Picture, Video or Logs and then press the ENTER button to
access the selection.
Use the ENTER button to view a Picture, Video or Data log. Press the ENTER button to delete a
picture, video or log. Use the ▲ button to confirm a deletion and press the ▼ button to cancel a
deletion.
Item
Picture
Video
Logs
Description
Display saved images
Playback saved videos
Display datalogger data
14
VIR50-EU-EN-V2.0 9/11
Advertisement
Table of Contents
