Biostar X570GTA Manual page 30

Memory Clock Mode
This item select the DRAM Frequency programming method. If Auto, the DRAM speed will be
based on SPDs. If Manual, the DRAM speed specified will be programmed regardless of SPD.
Options: Auto (Default) / Manual
Note
» The menu contents of the Memory clock mode will be slightly different depending on the memory card
used by the user.
» The following items appear only when you set the Memory Clock Mode function to [Manual].
Memory Frequency
This item select the memory clock value in MHz.
Options: Auto (Default)
DRAM Timing Configuration
This item select the DRAM Timing Configuration.
Options: Auto (Default)
DDR Memory Voltage
This item allows you to control DDR Memory Voltage.
Options: Auto (Default)
CPU Core Voltage
This item allows you to control CPU Core Voltage.
Options: Auto (Default)
CPU_SOC Voltage
This item allows you to control CPU_SOC Voltage Control.
Options: Auto (Default)
VDDP Voltage
This item allows you to control VDDP.
Options: Auto (Default)
DDR VPP Voltage
This item allows you to control DDR VPP Voltage.
Options: Auto (Default)
30 | 6. O.N.E Menu