Biostar X570GTA Manual page 12

ACPI Settings / WakeUp Event control
ErP Control
This item enables or disables ErP Control function. When ErP Enabled, system meets ErP
requirment. All wake up events do not work except Power Button after power down system(S5).
Options: Disabled (Default) / Enabled
ACPI Sleep State
This item allows you to select ACPI sleep state the system will enter when the SUSPEND button is
pressed.
Options: S3 (Suspend to RAM) (Default) / Suspend Disabled
Restore AC Power Loss
The item specify what state to go to when power is re-applied after a power failure.
Options: Power Off (Default) / Power On / Last State
PME Wake up from S5
The item enables the system to wake from S5 using PME event.
Options: Disabled (Default) / Enabled
Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event. When this item is enabled,
the system will wake on the hr::min::sec specified.
Options: Disabled (Default) / Enabled
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up time, input hour, minute and second to specify.
12 | 2. Advanced Menu