Epson Stylus OFFICE B30 Service Manual page 5

Revision Date of Issue
A August 9, 2007
B September 21, 2007
C August 6, 2008
Revision Status
First Release
Chapter 1
• 1.2.1 Basic Specifications (p. 10)
Note about a special nozzle of each color on the Printhead was added.
• 1.2.3 Supported Paper (p. 12)
Note about nominal weight was added.
Chapter 2
• 2.1.2 Motors & Sensors (p. 22)
Note about a special nozzle of each color on the Printhead was added.
• 2.2.1 Printhead (p. 23)
Note about a special nozzle of each color on the Printhead was added.
Chapter 4
• 4.1.2 Tools (p. 63)
The Upper Case Opener was added.
• 4.3.4 Upper Housing/Cover Open Sensor (p. 67)
CheckPoint of removing the Right Front Cover was added.
All Chapter
• The product names on the top page and the header of each chapter were revised due to the additional information on EPSON WorkForce
30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70.
• "Confidential" was added to all the pages.
Chapter 1
• 1.2.3 Supported Paper (p. 12)
The Photo Paper was added.
• 1.2.5 Ink Cartridge (p. 14)
The product numbers of the EPSON ink cartridges were added for WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70.
• 1.3 Interface (p. 15)
The Device IDs were added for EPSON WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70.
• 1.4.1 Electrical Specifications (p. 16)
The Power consumption was added for EPSON WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70.
• 1.4.5 Safety Approvals (Safety standards/EMI) (p. 17)
Safety Approvals were changed.
Chapter 2
• Electrical Circuit Operating Principles were deleated.
Chapter 7
• Electrical Circuits were deleated.
Description
Confidential