Epson Stylus OFFICE B30 Service Manual page 46

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70
Occurrence timing
Detailed phenomenon
CR position
A paper feeding sequence failed to feed
the paper, but a paper ejection sequence is
performed.
• Operation
• Outside HP
Paper is being resent during paper feeding
operation.
TROUBLESHOOTING
Table 3-6. Check point for paper jam error according to each phenomenon
Defective unit/
part name
1. Check if the ASF Unit is properly installed.
2. Check if the Paper Back Lever operates correctly in the
paper loading sequence.
ASF Unit
1. Check if the Extension Spring Retard operates correctly
in the paper loading sequence.
ASF Unit
Troubleshooting
Check point
Extension Spring 6.45
Paper Back Lever
Backside of ASF Unit
Extension Spring Retard
Revision C
Remedy
1. Install the ASF Unit properly.
2. Set the Extension Spring 6.45 between the ASF
Frame and the Paper Back Lever.
1. Set the Extension Spring Retard between the
Retard Roller Unit and the ASF Frame.
Confidential
46