Dragonfly Acoustiweave DF-SL-160-MW Assembly/Installation Instructions

• The screen is equipped with a set of mounting brackets. Align
the brackets according to the diagram below, measuring
from the outside edge of each bracket. Drill two holes for
each bracket. Insert 5x40mm screws for a studded wall, or
5x40mm screws + anchors for drywall/concrete without studs,
and hang. The screen should sit centered on the mounting
brackets when installed. Set the resting pin of the sliding
frame connectors, located on the inside of the frame, to the
bracket's pin slot. Thread two screws through each bracket
and sliding frame connector.
• Drywall/Stud Installation: Using a stud finder, locate studs in
wall. Hang top bracket first (subtracting 1/2" from top of
screen to mark corner edge of top of bracket) with 5X40mm
Philips head screws and washers directly into studs. Pre-
drilling studs with a 5/32" drill bit is recommended.
• Concrete Installation: Hang top bracket first (subtracting 1/2"
from top of screen to mark corner edge of top of bracket).
Pre-drill 3 holes into concrete with 1/4" concrete bit and insert
concrete anchors. Position top bracket over holes and insert
5X40mm Philips head screws and washers.
48"
85.75"
Black Acoustically Transparent Material (Optional installation)
Black acoustically transparent material is for the Acoustiweave™
screen only.
• Light reflection can be an issue with any acoustically
transparent material. If painting reflective surfaces is not
an option to control light reflection, an acoustically
transparent black fabric has been included. Simply hang
the fabric directly behind the screen in any manner that
fits your installation.
A
B
D
C
E
A B C D E
DF-SL-160-MW/HC 160" 78.53" 139.54" 86.4" 147.3"

Care and cleaning

• Your new screen can be effectively cleaned with a soft cloth
using mild soap and water. DO NOT use harsh detergents,
chemicals, distilled spirits or petro-chemicals to clean the
screen; doing so may result in severe damage to the screen or
the frame coating.
• If the felt covering on the frame gets dusty or covered with
lint, use a household vacuum cleaner with a brush or furniture
cleaning attachment to clean the felt. We do not recommend
using excessive amounts of water on the felt.
Fixed Film Screen with Black Velvet Frame
F
F
85.75"
Assembly
&
Installation
Instructions