Specifications - Prime Controls DS1510 Operating Instructions Manual

SPECIFICATIONS

SPECIFICATIONS
Power Requirements
AC Power, 90 to 240 volts, 15 watts.
Logic Input Electrical Specifications
CAL, RESET, AUXIN:
When the internal jumper is installed for pull up to accommodate sinking drivers, the input is
pulled to +15 volts through 4700 ohms. When the jumper is installed for pull down to
accommodate sourcing drivers, the input is pulled to common through 4700 ohms.
Logic Output Electrical Specifications
AUXO, FAULT:
Output Relay Specifications
Maximum switched voltage:
Maximum switched current:
Maximum switched power:
Minimum required contact load:
Expected mechanical life:
Expected electrical life:
30 Volts maximum
Upper switch threshold - 6.9 volts
Lower switch threshold - 3.3 volts
NPN open collector, 100mA max., 50 volts max.
380VAC
14 amps N.O., 5 amps N.C, AC resistive,
8 amps DC
200W DC, 2,000VA AC.
12V, 100 mA
20 million operations
100,000 operations at 8 amps, 240VAC
50,000 operations at 14 amps N.O., 5 amps N.C.,
120VAC resistive
30,000 operations at 7.2FLA, 45LRA, 120VAC
10,000 operations at 5FLA, 30 LRA, 240VAC
14