Table of Contents
Advertisement
Chapter 16
To use the VPN feature, you need to set up IPSec VPN Server on your router, and
configure theIPSec connection on remote devices. Please follow the steps below to
set up the IPSec VPN connection.
Home Network
Step 1 Set up IPSec VPN Server on Your Router
1. Visit
http://tplinkmodem.net
set for the GPON router.
2. Go to
Advanced
>
Note:
•
Firmware update may be required to support IPSec VPN Server.
•
Before you enable
Dead Peer
assign a static IP address for router's WAN port and synchronize your
3. Click Add.
4. Configure the IPSec VPN server parameters.
Router (VPN Server)
or http://192.168.1.1, and log in with the password you
VPN
>
IPSec
VPN, and enable
Detection, we recommend you configure Dynamic DNS Service (recommended) or
INTERNET
Remote Devices
Dead Peer
Detection.
System Time
with internet.
VPN Server&Client
138
Advertisement
Table of Contents
