Table of Contents
Advertisement
Chapter 6
Internal number showed on the table are used to make calls between telephony devices connected to the same GPON
router. It is preset and cannot be changed.
6 5
Call Log
I want to:
How can I
do that?
Done!
6 6
Digit Map
A digit map can be used to match digits to control numbers from being dialed. A number
can only be dialed out when the sequence of its digits matches the digit map.
1 Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
example settings.
3
Save
the settings. Now, only the numbers matching the digit map can be dialed out.
Have a call list recording detailed information of incoming calls
and outgoing calls on your GPON router.
1 Visit
http://tplinkmodem.net
with the password you set for the GPON router.
2 Go to
Advanced
3 Enable Call Log.
From now on, all calls in and out are recorded here. If you've
already had a telephone book, name of the contact would be
shown on the call list.
or http://192.168.1.1, and log in with the password you
>
Telephony
>
Digit
Map. Enter a digit map rule by referring to the
or http://192.168.1.1, and log in
>
Telephony
>
Call
Log.
VoIP
55
Advertisement
Table of Contents
