Skoda Rapid 2013 Owner's Manual page 41

Hide thumbs Also See for Rapid 2013:
Table of Contents

Advertisement

CAUTION
To avoid damage to the electrical system, never connect power supplying com-
ponents, such as solar panels or battery chargers for charging the vehicle battery,
to the 12-Volt power socket.
Only use accessories that have been tested for electromagnetic compatibility in
accordance with the applicable directives.
To prevent damage from power fluctuations, the devices connected to the 12-
Volt power socket must be switched off before you switch the ignition on or off
and before starting the engine.
Never connect electrical devices to a 12-Volt power socket that consume more
than the specified watts. Exceeding the maximum power consumption may dam-
age the electrical system of the vehicle.
For the sake of the environment
Do not keep the engine running while the vehicle is stationary.
Notice
The vehicle battery will discharge when the ignition is switched on while the en-
gine is stopped and electrical accessories are being used.
Notice
Unshielded devices can cause interference to the radio and to the vehicle elec-
tronics.
Notice
There may be interference in the AM band of the radio if electrical devices are
used near the rear window aerial.
Power socket in the vehicle
First read and observe the introductory information and safety warn-
ings
on page 38.
The 12-Volt power socket is located in the front centre console
Maximum power consumption
Power socket
Maximum power consumption
12 Volt
120 Watt
The maximum power consumption of the power socket must not be exceeded.
The power consumption of devices is indicated on their type plates.
The total power consumption of all connected electrical devices when connecting
multiple devices simultaneously may not exceed 190 Watt
12-Volt power socket
The 12-Volt power socket will only work when ignition is switched on.
The vehicle battery will discharge when the ignition is switched on while the en-
gine is stopped and electrical devices are being used. Therefore, use electrical
consumers on the power socket only with the engine running.
Switch off the connected devices before you switch the ignition on or off and be-
fore starting the engine, to avoid damage from voltage fluctuations.
Fig. 29
In the front centre console: 12-
Volt power socket
» fig.
29.
»
.
39
Seats and useful equipment

Advertisement

Table of Contents
loading

Table of Contents