Table of Contents
Advertisement
WARNING
Failure to observe the checklist, which is for your own safety, can lead to acci-
dents and serious injuries.
Always follow the actions in the checklist and observe general safety pre-
■
cautions.
Replacing bulbs in the headlamp (Halogen H4)
Fig. 86 Rear view of the right H4 headlamp
Bulb replacement in the H4 headlamp
Perform the actions in the specified order:
1.
2.
Remove the protective cover
Pull the connecting plug off the bulb.
Fold down the bulb
3.
Pull the bulb
4.
140
Do-it-yourself
Low beam and main beam
Follow the checklist and carry out the actions
» fig.
86.
1
by inserting slight pressure
3
(arrow).
in backwards direction out of the
3
bulb housing.
Replace the failed bulb with a new bulb of the same type.
CAUTION
Failure to replace the rubber seals or plastic caps on the headlamp housing cor-
rectly after bulb replacement, can cause damage to the electrical system – due to
water penetration in particular.
First read and observe the introductory information and safety warn-
ings
on page 139.
Turn signal light (at the front)
Open the bonnet
» page
99.
Turn the bulb housing
anti-clock-
2
wise to the stop and pull out towards
the back along with the bulb.
Parking lights
» page
139.
Remove the protective cover
Pull out the bulb housing and the bulb
the back.
.
1
towards
4
Advertisement
Chapters
Table of Contents
