Table of Contents
Advertisement
Front towing eye
Fig. 82 In the bumper front right: screw in the towing eye
First read and observe the introductory information and safety warn-
ings
on page 134.
The mount for the screw-type towing eye is located front right in the bump-
er
» fig.
82.
You must always keep the towing eye in the vehicle.
Observe the instructions on towing
Fitting the front towing eye
›
Remove the towing eye and wheel wrench from the tool kit in the luggage com-
partment
» page
127.
›
Press the left edge of the cover
» fig. 82
›
Pull out the cover and leave it hanging on the vehicle.
›
Screw the towing eye as firmly as possible, anticlockwise into the
mount
» fig. 82
-
»
. Use the wheel wrench or another suitable object to
screw the towing eye fully and firmly into the mount.
›
After towing, unscrew the towing eye clockwise and refit the cover.
›
If needed, clean the towing eye and wheel wrench and replace in the tool kit in
the luggage compartment.
CAUTION
The towing eye must always be fully and firmly screwed into the mount. Other-
wise, the towing eye might tear out of the mount during tow-starting or towing.
136
Do-it-yourself
» page
134.
- - arrow.
Rear towing eye
First read and observe the introductory information and safety warn-
ings
on page 134.
A fixed towing eye is located on the rear right below the bumper
pending on the equipment level, there may be a cover on the towing eye; you
must remove this before use.
Observe the instructions on towing
Fig. 83
In the bumper rear right: fixed
towing eye
» fig.
» page
134.
83. De-
Advertisement
Chapters
Table of Contents
