Parts Of The Heater; Pilot Light - Hunter HPA15B Owner's Manual

PARTS OF THE HEATER

Parts of the heater
1. Thermostat Control

2. Pilot Light

3. Power Control
4. Safety Grille
(Figure 1)
OPERATING INSTRUCTIONS
1. Set the heater on a dry, level surface.
2. Make sure the Power Control is in
into any standard 120 V AC outlet. (Figure 2)
3. Set the Thermostat Control all the way to clockwise direction
(maximum). (Figure 3)
4. Set the Power Control to
the room is comfortable, select
consumption and to prevent the room from becoming too warm.
(Figure 2)
5. For fan-only operation, without any heat output, turn the
Power Control to
6. This heater is equipped with a thermostat function to control
the temperature output. To increase the heat output, turn the
Thermostat Control clockwise. To reduce the heat output, turn
the Thermostat Control counterclockwise. (Figure 3)
This fan heater is equipped with a Pilot Light, which glows
whenever the heater is plugged in and turned on. It will continue
to glow even if the thermostat has cycled the heating elements
off. This feature is to prevent you from being unaware that the
heater is in operation.
Symbols
Power Off
Fan Only
Low Heat Setting
High Heat Setting
(Figure 2)
(off) position. Plug cord
for fast warm up of a room. Once
to reduce electrical
. (Figure 2)
PILOT LIGHT
5
2
4
Figure 1
Figure 2
Figure 3
81610-01 R20150810
1
3