Transporting - Toshiba 288V Installation And Operation Manual

3.6

Transporting

8
WARNING
DO NOT tilt any cabinets in the ESS more than 10° from upright
position.
Tilting the units more than 10° may cause crushing, trapping or other
personal injuries.
CAUTION
DO NOT transport, move, store, or place any of the units in the
SCiB ESS on its side.
Excessive force applied from heavy components inside may damage
the unit.
Avoid vibration or shock exceeding 0.5 G.
Failing to observe this precaution may cause damage to the SCiB
ESS.
DO NOT allow any units to suffer shock or impact when unpacking.
Tools used to remove packaging materials may cause damage to the
SCiB ESS system.
DO NOT install any units where water may fall on or enter it.
Water may cause electrical shock, personal injury or system failure.
DO NOT push or pull on the sides of the packaging or any units
to move them. Always use a crane, forklift, or pallet jack for
transporting and positioning the units.
Pushing/pulling on the sides of the unit to move it may result in damage
to the SCiB ESS.
288V SCiB Energy Storage System Installation and Operation Manual – 203810-000