Lancaster Crossback Chair Assembly Instructions

Crossback Chair
A S S E M B LY I N S T R U C T I O N S
PA R T S L I S T:
Frame 1/PC
A
S T E P 1
Option 1: Place chair frame (A) on its back. Center
cushion (B) on the frame with four screw holes, push
the cushion against frame, ensure front of cushion is
parallel to the front of the frame.
A
C R O S S B A C K C H A I R • A S S E M B LY I N S T R U C T I O N S
2
B Vinyl Cushion 1/PC
C Screws 4/PC
R E Q U I R E D T O O L S : Screwdriver
N O T E S :
1. Inspect all pieces for damage before assembly.
Do not assemble if any pieces are broken or damaged.
Ensure you have all required pieces before assembly.
2. Power drill is optional for assembly.
3. There are two options for assembly, please reference both
steps for your preference.
Option 2: Place seat (B) upside down on a flat surface,
preferably a table. Align chair frame (A) on top of cushion
(B). Center cushion with four screw holes on frame, push
cushion against the back of the frame and ensure front of
cushion is parallel to the front of the frame.
O R
B
A
B
W W W . L A N C A S T E R TA B L E A N D S E A T I N G . C O M