Table of Contents
Advertisement
Available languages
Available languages
Quick Links
TOOLS REQUIRED
Claw hammer
Safety goggles
Measuring tape
Wall hardware
Installation
1
DETERMINING THE MOUNTING LOCATION
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Determine the desired mounting location, and mark
the wall where the unit will be installed.
3
INSTALLING THE CABINET
□ For wall stud installation, insert #12 x 3 in. screws with washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate locations and insert toggle bolts with washers
(not included).
□ For concrete wall installation, drill 1/4 in. holes at the appropriate locations and insert #12 wall
anchors, followed by #12 x 3 in. screws (not included).
Use and Care Guide
Bath Storage Cabinet
Phillips screwdriver
Level
Model #TTH-NHK
HARDWARE INCLUDED
AA- Knob
Power drill
x 2
2
PREPARING THE CABINET
□ Drill 1/8 in. diameter holes through the back
panel of the cabinet on all four corners.
Item #722 628
BB - Knob Screw
CC - Shelf Clip
x 2
DD - Shelf x 2
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.
x 4
Advertisement
Table of Contents
Related Manuals for Glacier bay TTH-NHK
Summary of Contents for Glacier bay TTH-NHK
- Page 1 Model #TTH-NHK Item #722 628 Use and Care Guide Bath Storage Cabinet TOOLS REQUIRED HARDWARE INCLUDED AA- Knob BB - Knob Screw CC - Shelf Clip Claw hammer Safety goggles Phillips screwdriver Power drill DD - Shelf x 2 Measuring tape...
- Page 2 Installation (continued) INSTALLING THE SHELF INSTALLING THE KNOBS □ Insert the shelf clips (CC) □ Attach the knobs (AA) to the into the holes on the cabinet with the knob inside of the cabinet. screws (BB). □ Rest the shelf (DD) on the shelf clips (CC).
- Page 3 Núm. de artículo 722 628 Núm. de modelo TTH-NHK Guía de uso y cuidado Gabinete de almacenamiento para baño HERRAMIENTAS REQUERIDAS HERRAJE INCLUIDO Martillo de garra Gafas de seguridad Destornillador Phillips Taladro AA- Perilla BB - Tornillo de CC - Gancho...
- Page 4 Instalación (continuado) INSTALACIÓN DE LAS REPISAS INSTALACIÓN DE LA PERILLA □ Inserte los ganchos de □ Instale la perilla (AA) en el repisa (CC) proporcionados gabinete con el tornillo en los agujeros en el de perilla (BB) proporcionado. interior del gabinete. □...
Need help?
Do you have a question about the TTH-NHK and is the answer not in the manual?
Questions and answers