Samsung MOK-100LA Installation Manual page 9

3. Assemble the control box and the control kit.

• The control kit must be taken into the

control box. (Check the fitting holes.)

• The UL certification must be acquired.

• When the louver actuator shaft enters into

the box, prevent water penetration. (Use a

bushing and such.)

• When assembling the control kit, use the

boss with12 mm or above in size.

(The heat transfer distance between the

control kit and control box must be 12 mm

or above.)

4. Assemble the damper and Assy control box.

LOUVER

SHAFT

WARNING

• When assembling the damper and Assy control box, be sure to fix the shaft and actuator (Nut x2)

in the louver in fully open state.

DB68-06398A-01_IM_ACC 옵션 저온냉방 Kit_AA_EN_.indd 9

13 /

5 /

FULL OPEN

NUT

Louver

SCREW X 4 EA

1 /

Damper

2022-09-08 오후 1:53:03

Table of Contents