Samsung MOK-100LA Installation Manual page 7

Installing LAC KIT

Ú Before installation on field, it must be assembled.

Assembling the Assy Control Kit and Low Ambient Damper

1. Connect the actuator to TRANS.

– Place the actuator and TRANS on the Assy controller kit as shown in the figure and then

fix them on the plate with bolts, nuts, and screws.

Note

• Assemble them with the same alignment and rotation for the actuator as the figure below.

If its alignment and rotation are not correct, it may cause malfunction.

Note

• The direction of the actuator can be changed as follows:

DB68-06398A-01_IM_ACC 옵션 저온냉방 Kit_AA_EN_.indd 7

2022-09-08 오후 1:53:03

Table of Contents