Congratulations on choosing a Litepanels product! We thank you for your custom. Please note that this product, as well as all the other Litepanels products, has been designed and manufac- tured with high quality materials and manufacturing processes to ensure excellent performance and to best meet your expectations and requirements.
Studio LED X3 PLUS Bicolor General Delivery Notes The basic Studio LED X3 PLUS Bicolor pack contains the following components: • Projector • 4-leaf rotating barndoor • Instruction booklet...
Studio LED X3 PLUS Bicolor Technical Specifications LIGHT SOURCE Array LEDs MAX POWER 100W CORRELATED COLOR TEMPERATURE Tunable from 2700K to 6500K BEAM ANGLE 10° - 67° LENS DIAMETER 130 mm POWER SUPPLY 90 – 260 Vac, 50/60 Hz, autosensing POWER FACTOR (cosφ)
Studio LED X3 PLUS Bicolor Safety Notes Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely.
Page 8
Avoid exposing the device to atmospheric agents such as rain, damp, etc. IMPORTANT If the power cable is damaged it must immediately be replaced with a suitable cable exclusively available from the Litepanels assistance service or authorised Litepanels service centres. DANGER The illuminator must never be used near to inflammable sources or materials.
Page 9
Studio LED X3 PLUS Bicolor IMPORTANT Litepanels does not accept responsibility for damage or malfunctions caused by not observing these instructions or by unauthorised modifications of the device. Damage caused by modifications or tampering are not covered by the warranty.
Installation MECHANICAL INSTALLATION The Studio LED X3 PLUS Bicolor can be positioned directly on the stage floor, on a tripod or hanged on a truss or on the ceiling or wall without altering its operation characteristics. Before suspending the illuminator, ensure that the carrying structure is capable of holding the weight of the device and that it is supplied with suitable secondary safety systems (steel cable, chains, etc.).
ANCE WITH ALL NATIONAL AND LOCAL ELECTRICAL AND CONSTRUCTION CODES AND REGULATION The Studio LED X3 PLUS Bicolor series fixture operates on AC power, 90 – 260 Vac, 50/60 Hz, autosens- ing. It will automatically adjust its operation to suit any frequency or voltage within this range.
Page 12
Studio LED X3 PLUS Bicolor If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
CCT adjustment manually. The dimming level and the CCT are shown in the display. • [USB] USB port is used to connect the Studio LED X3 PLUS Bicolor to a PC to upgrade the firmware, make a check up of the fixture, change the system parameters.
Studio LED X3 PLUS Bicolor Programming Control Menu DMX ADDRESS Allows you to set the DMX ADDRESS of the fixture. On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter]. Use the [Up] and [Down] button to scroll to DMX Address and then press [Enter].
Page 19
Studio LED X3 PLUS Bicolor On the Home screen press [DOWN] to scroll to Menu info and then press [Enter]. Use the [Up] and [Down] button to scroll to SERIAL ID and then press [Enter]. The LCD displays the ID number.
Studio LED X3 PLUS Bicolor Maintenance and Cleaning WARNING DISCONNECT FROM THE MAINS BEFORE STARTING ANY MAINTENANCE WORK To ensure the maximum performance of your Studio LED X4 Plus BI-COLOR it is absolutely essential that the fixture is kept clean.
Studio LED X3 PLUS Bicolor Warranty In order for a product to be covered under Litepanels warranty, the customer must provide proof of pur- chase. However, please note that this warranty is transferable. 2 Year warranty from date of purchase.
Studio LED X3 PLUS Bicolor Disclaimer The information contained in this manual is believed to be correct at the time of printing. Videndum Pro- duction Solutions Inc. reserves the right to make the changes to the information or specifications without obligation to notify any person of such revisions or changes.
Need help?
Do you have a question about the Studio LED X3 PLUS Bicolor and is the answer not in the manual?
Questions and answers