Related Manuals for Litepanels Studio LED X6 PLUS
Summary of Contents for Litepanels Studio LED X6 PLUS
- Page 1 ENGLISH Studio LED X6 PLUS SKU: 960-6301 / 960-6302 Publication date 25th September 2023...
-
Page 2: Table Of Contents
Studio LED X6 PLUS Table of Contents Copyright ..................3 Introduction . -
Page 3: Copyright
Studio LED X6 PLUS Copyright Copyright © 2022 All rights reserved. Original Instructions: English All rights reserved throughout the world. No part of this publication may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of Videndum Plc. -
Page 4: Introduction
Congratulations on choosing a Litepanels product! We thank you for your custom. Please note that this product, as well as all the other Litepanels products, has been designed and manufac- tured with high quality materials and manufacturing processes to ensure excellent performance and to best meet your expectations and requirements. -
Page 5: General Delivery Notes
Studio LED X6 PLUS General Delivery Notes The basic Studio LED X6 PLUS pack contains the following components: • Projector • 4-leaf rotating barndoor • Instruction booklet... -
Page 6: Technical Specifications
Studio LED X6 PLUS Technical Specifications LIGHT SOURCE Array LEDs MAX POWER 300W CORRELATED COLOR TEMPERATURE Fixed 3200K-5600K BEAM ANGLE 12° - 60° LENS DIAMETER 250 mm POWER SUPPLY 90 – 260 Vac, 50/60 Hz, autosensing POWER FACTOR (cosφ) 0,97... -
Page 7: Safety Notes
Studio LED X6 PLUS Safety Notes Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference. - Page 8 Avoid exposing the device to atmospheric agents such as rain, damp, etc. IMPORTANT If the power cable is damaged it must immediately be replaced with a suitable cable exclusively available from the Litepanels assistance service or authorised Litepanels service centres. DANGER The illuminator must never be used near to inflammable sources or materials.
- Page 9 Studio LED X6 PLUS IMPORTANT Litepanels does not accept responsibility for damage or malfunctions caused by not observing these instructions or by unauthorised modifications of the device. Damage caused by modifications or tampering are not covered by the warranty. IMPORTANT...
-
Page 10: Installation
Installation MECHANICAL INSTALLATION The Studio LED X6 PLUS can be positioned directly on the stage floor, on a tripod or hanged on a truss or on the ceiling or wall without altering its operation characteristics. Before suspending the illuminator, ensure that the carrying structure is capable of holding the weight of the device and that it is supplied with suitable secondary safety systems (steel cable, chains, etc.). -
Page 11: Electric Installation
ANCE WITH ALL NATIONAL AND LOCAL ELECTRICAL AND CONSTRUCTION CODES AND REGULATION The Studio LED X6 PLUS series fixture operates on AC power, 90 – 260 Vac, 50/60 Hz, autosensing. It will automatically adjust its operation to suit any frequency or voltage within this range. - Page 12 Studio LED X6 PLUS If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
-
Page 13: Control Menu
CCT adjustment manually. The dimming level and the CCT are shown in the display. • [USB] USB port is used to connect the Studio LED X6 PLUS to a PC to upgrade the firmware, make a check up of the fixture, change the system parameters. -
Page 14: Control Menu Map
Studio LED X6 PLUS Control Menu Map... -
Page 15: Dmx Chart
Studio LED X6 PLUS DMX Chart DMX CH1 % POWER % DMX CH2 % CCT K REALE 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800... - Page 16 Studio LED X6 PLUS 4700 4750 4800 4850 4900 4950 5000 5050 5100 5150 5200 5250 5300 5350 5400 5450 5500 5550 5600 5650 5700 5750 5800 5850 5900 5950 6000 6050 6100 6150 6200 6250 6300 6350 6400 6450...
- Page 17 Studio LED X6 PLUS 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500...
-
Page 18: Programming Control Menu
Studio LED X6 PLUS Programming Control Menu DMX ADDRESS Allows you to set the DMX ADDRESS of the fixture. On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter]. Use the [Up] and [Down] button to scroll to DMX Address and then press [Enter]. - Page 19 Studio LED X6 PLUS On the Home screen press [DOWN] to scroll to Menu info and then press [Enter]. Use the [Up] and [Down] button to scroll to SERIAL ID and then press [Enter]. The LCD displays the ID number.
-
Page 20: Maintenance And Cleaning
Studio LED X6 PLUS Maintenance and Cleaning WARNING DISCONNECT FROM THE MAINS BEFORE STARTING ANY MAINTENANCE WORK To ensure the maximum performance of your Studio LED X4 Plus BI-COLOR it is absolutely essential that the fixture is kept clean. Regular cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life. -
Page 21: Warranty
Studio LED X6 PLUS Warranty In order for a product to be covered under Litepanels warranty, the customer must provide proof of pur- chase. However, please note that this warranty is transferable. 2 Year warranty from date of purchase. Customer must provide proof of purchase. -
Page 22: Disclaimer
Studio LED X6 PLUS Disclaimer The information contained in this manual is believed to be correct at the time of printing. Videndum Pro- duction Solutions Inc. reserves the right to make the changes to the information or specifications without obligation to notify any person of such revisions or changes. Changes will be incorporated in new versions of the publication.