Table of Contents
Advertisement
10.2.2 Installing the shelf assembly
__ 1. See Figure 7. Working from the front of the rack, pull the left and right slide rails forward 1 until
they securely click twice, into place.
__ a. Position the shelf assembly above the slide rails.
__ b. Tilt the back of the tray downward so the rear screw heads 2 on the tray line up with the
rear slots 3 on the side rails.
__ c. Slowly lower the front of the tray 4 until the center and front screw heads slip into the
remaining slots on the rails. You can feel and hear the tray settle into position on the rails.
__ d. Ensure that the front latch 5 slides over the rail heads.
2
3
Figure 7. Attaching the shelf assembly to the slide rails
__ 2. See Figure 8 on page 14. Simultaneously lift the locking levers 1 on the slide rails and push the
tray back 2 into the rack. When fully inserted, the tray stops and clicks into place.
1
4
5
Installation (Sections 9 through 12)
13
Advertisement
Table of Contents
