Table of Contents
Advertisement
__ a. Pull the spring loaded pin 1 .
__ b. Slide the stop bracket end 2 into the end of the left slide rail 3 .
Figure 12. Connecting the support arm to the rear of the slide rail
__ 4. See Figure 13 on page 18. To attach the arm mounting bracket:
__ a. Get the mounting bracket 1 .
__ b. Pull the spring loaded pin 2 .
__ c. Slide the mounting bracket tab 3 into the rail onto which you are installing the cable
management arm.
3
2
1
Installation (Sections 9 through 12)
17
Advertisement
Table of Contents
